Nikwax Analogy Waterproof fabric is more than just breathable, it is directional.
This means it is capable of moving liquid water away from your body and not just water vapour.
It is essential to avoid a build-up of water in your clothing system when you are working hard, as too much retained moisture will lead to your body rapidly chilling when you stop and rest.
In conventional clothing systems, approximately 20% of sweat production is dealt with effectively, leaving the remaining 80% trapped inside.
Nikwax Analogy garments are unique, in that they pump out this 80% of liquid water and allow it to drain away; you are left feeling dry and comfortable.
Which garments should I wear with my Nikwax Analogy Waterproof for optimum performance?
We recommend using our Parameta®T+, Parameta T, or Parameta G baselayers underneath your Nikwax Analogy clothing.
The Parameta T+ is a reversible, lightweight and stretchy polyester fabric, which offers two levels of cooling. It is asymmetrical and wicking, directing water from one fabric face to the other, as well as rapidly spreading moisture to speed up evaporation and, therefore, cooling.
Parameta T is a lightweight and stretchy polyester fabric. It wicks effectively to spread perspiration and dry quickly, providing light insulation in cooler conditions. Its soft feel is very comfortable against the skin, even when worn for prolonged periods.
Parameta G directional polyester fabric can provide either cooling or insulation, as needed. Its raised grid pattern traps air for insulation when covered with another layer. However, worn alone, or exposed through a garment vent, it allows air to pass through it and cool you down.
In extremely cold conditions, our Nikwax Analogy Insulator garments can be worn over your waterproof clothing. This is useful when stopping, or setting up camp at the end of the day.
How do I care for my Páramo waterproof?
Always wash this garment withNikwax Tech Wash®to remove dirt and revive the water-repellency. If, even after washing, the garment outer absorbs water, it is time to reproof withNikwax TX.Direct®. If you very heavily soil your garment, for example with tar or oil, you can have it dry cleaned. It will then need to be washed with Tech Wash and reproofed with TX.Direct.
Nikwax Tech Wash and TX.Direct are market leading products. They have been specifically designed and optimised for breathable waterproof fabrics. Application in a washing machine is quick, easy, and ensures that the whole garment is thoroughly cleaned and waterproofed.
Nikwax Tech Washis a highly effective cleaner. Additionally it will revitalise existing Durable Water Repellency (DWR) and revive breathability. It is the safe way to thoroughly clean your waterproof clothing and equipment.
Nikwax TX.Direct Wash-Inhas been specifically designed and optimised for breathable waterproof garments; it leaves a flexible water repellent treatment on individual fibres allowing moisture vapour to pass through, maintaining breathability.
What if I damage my Nikwax Analogy Waterproof clothing?
Simple repairs can often be done with a needle and thread without compromising the performance of your Páramo gear.
If you seriously damage a garment, you can send it back to Páramo and request a quote for having it mended – most damage can be repaired!
Páramo clothing does not rely on hazardous fluorocarbon (PFC) treatments in its finishing or aftercare processes.
Working closely with Nikwax®, Páramo have pioneered treatment processes for its garments which enables us to take untreated fabrics and add Nikwax Aftercare, not reliant on fluorocarbons, to enhance the movement of water to where it is most beneficial. Studies show that fluorocarbons of all kinds persist in the environment and are damaging to human health. Nikwax aftercare solutions are water-based and use no harmful solvents or propellant gases, are not tested on animals, not harmful to humans, and contain no damaging fluorocarbons.
For more information on our PFC policy, click here.
This garment is made by the charitable Miquelina Foundation.