- More Info
- Reviews
The difference between Scandinavian grind and a Full Flat grind
This steel in combination with a Scandinavian grind makes these knives very tough and resilient to heavy chores, even with the point. It also allows the knife to be controlled very accurately when carving wood. This Grind is particularly suitable for bushcraft use. When re-sharpening the whole bevel should be sharpenend in order to maintain its properties or a secondary bevel can be added to make the edge even stronger.
The Full flat ground version is sharpened from the spine of the blade with a more acute angle and with a less acute secondary bevel. This grind makes the knives very effective at cutting softer materials, it makes them even more versatile yet still very strong. Some control is lost for carving wood but the knife is easier to use for skinning, preparing food and most day to day chores. When re-sharpening the Full Flat grind only the secondary bevel is re-sharpened with an angle of approx 40-50 degrees in total.
Böhler Tool Steel K720 (O2) is a very tough and strong oil hardened high carbon tool steel. The focus of the steel is toughness and edge stability. The chemical composition allows it to be hardened to a high degree whilst maintaining ductility and toughness. This means the blade holds its edge for longer at the same time as it is resistant to chipping and cracking under heavy use. This steel also has a very fine structure making it easy to sharpen and achieve a razor sharp edge with. Whilst easy to sharpen, the low chromium content means it will tarnish if left wet and it must therefore be wiped after use and protected by oil or wax when put away for storage if you want to avoid tarnish building up.
Steel analysis: C. 0.9%, Si. 0.25%, Mn. 2.0%, Cr. 0.35% V. 0.1% (HRC 58-60)
We will age verify all purchasers - do not order if you are under 18.
Your package will be marked over 18 only, in line with government expectations.
Manufacturers Product Number 13101
This steel in combination with a Scandinavian grind makes these knives very tough and resilient to heavy chores, even with the point. It also allows the knife to be controlled very accurately when carving wood. This Grind is particularly suitable for bushcraft use. When re-sharpening the whole bevel should be sharpenend in order to maintain its properties or a secondary bevel can be added to make the edge even stronger.
The Full flat ground version is sharpened from the spine of the blade with a more acute angle and with a less acute secondary bevel. This grind makes the knives very effective at cutting softer materials, it makes them even more versatile yet still very strong. Some control is lost for carving wood but the knife is easier to use for skinning, preparing food and most day to day chores. When re-sharpening the Full Flat grind only the secondary bevel is re-sharpened with an angle of approx 40-50 degrees in total.
ABOUT THE STEEL
:O2 HIGH CARBON TOOL STEELBöhler Tool Steel K720 (O2) is a very tough and strong oil hardened high carbon tool steel. The focus of the steel is toughness and edge stability. The chemical composition allows it to be hardened to a high degree whilst maintaining ductility and toughness. This means the blade holds its edge for longer at the same time as it is resistant to chipping and cracking under heavy use. This steel also has a very fine structure making it easy to sharpen and achieve a razor sharp edge with. Whilst easy to sharpen, the low chromium content means it will tarnish if left wet and it must therefore be wiped after use and protected by oil or wax when put away for storage if you want to avoid tarnish building up.
Steel analysis: C. 0.9%, Si. 0.25%, Mn. 2.0%, Cr. 0.35% V. 0.1% (HRC 58-60)
We will age verify all purchasers - do not order if you are under 18.
Your package will be marked over 18 only, in line with government expectations.
Manufacturers Product Number 13101