Gear Aid Seam Grip +Sil Silicon Seam Sealant 28g

The essential field repair kit specially designed to seal and waterproof seams of tents, awnings, rucksacks and any other products constructed of silicon based fabrics.
For other types of materals use Gear Aid Seam Grip +WP.

REPAIR KIT INSTRUCTIONS
· CLEAN surfaces with isopropyl alchol (Not supplied)

· APPLY SilNet to the inside of seam: apply thin layer across taut thread and under folds.

· LET DRY for 3 - 6 hours, test the newly repaired area before use or folding.

Out of Stock
  • 9.99

Quantity:  


  • More Info
  • Reviews
REPAIR KIT INSTRUCTIONS
The patches supplied in this kit will provide a temporary water resistant repair for GORE-TEX® fabric products.



· Patches should be kept in sealed plastic bag until used.

· Area to be repaired must be clean and dry.

· Patch will not adhere effectively to loose debris, grease or oil.

· Patch should overlap tear by at least 1/2" in all directions.

· Remove release paper from back of patch. Lay GORE® product on a smooth flat surface and apply patch using finger pressure (adhesive side down). Rub patch surface in a circular motion from the center out covering the entire patch area.

· Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours.

· The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to medium heat. Press with moderate pressure in a circular motion for 30 seconds.

Manufacturers Product Number 10440