Liard Fireboxes

A Swiss engineered, warp- and rust-free firebox for outfitters, hunters and trappers, canoeists and other outdoor enthusiasts!

The concept of the firebox is a well proven one. Using small pieces of wood in a concentrated area, they are ideal when you want the warmth of a campfire, in a safe, functional and environmentally conscious manner. Fireboxes have been used for many years by outfitters, hunters and trappers, canoeists and other outdoors enthusiasts and are usually made from normal metal sheet.

What makes the LIARD FIREBOX different from other fireboxes?
The difference is in its engineering and quality. Other fireboxes will rust and warp. The LIARD FIREBOX will not rust and will not warp. Manufactured in Switzerland, constructed with stainless steel, using patented* design improvements, the LIARD FIREBOX is the most convenient there is.

(* patent pending)

Safe & Environmentally Friendly
Easy to assemble and disassemble, the LIARD FIREBOX allows you to have a contained fire just about anywhere. While open fires can be dangerous and leave unsightly scars, the LIARD FIREBOX allows you to dispose of your ashes safely, leaving little or no trace of your fire behind. When you’re done, the Firebox packs up quickly and you’re on your way!

Great for Cooking
The LIARD FIREBOX makes cooking easy. Because of its efficient design, the LIARD FIREBOX burns far less wood than an open fire and concentrates the heat to the to grill plate. The sturdy design also makes boiling a kettle or cooking a soup a breeze. Grilling meat is a treat, thanks to the LIARD FIREBOX’s easy to clean material*.
* For your own safety, please take care when preparing food around wild animals.

Caring for the LIARD FIREBOX
The LIARD FIREBOX is designed to be robust and will show little wear even after frequent use. There are no bolts or pins to break or lose.
Some brown discoloration on the components should be expected after using the LIARD FIREBOX. While this does not affect the functionality of the unit, you may choose to clean your LIARD FIREBOX on occasion. If so, use a standard low-abrasion cleaning cloth and an environmentally friendly soap. If you are cleaning your LIARD FIREBOX in the field, please dispose of wastewater well away from bodies of water.
You may notice some parts of your firebox bending slightly after being heated or cooled suddenly. Do not be alarmed. This should not affect the functionality of your LIARD FIREBOX. After giving the parts some time to cool (approximately an hour), the part should return to normal. If it does not, you may choose to manipulate the part by hand.

Practical, collapsible fire boxes for heating and cooking.

Tentipi® design

The fire box gives off plenty of heat with very little smoke. Makes it easy to grill, cook, or just enjoy the heat and light! Its clever design means that it takes up very little space when packed.

Normally, when you make a fire direct on the ground, a bed of coals builds up quickly. Wood stumps roll to the edges gently smoking.

Visible smoke contains non-combusted gases. Insufficient combustion gives three negative effects: 1. The degree of efficiency is unsatisfactory. 2. Tar particles in the smoke burn your eyes. 3. The smoke is relatively cold and does not rise so easily.

The Tentipi® fire box solves all these problems in a clever way. Many holes in the bottom provide the fire with sufficient oxygen. This both increases the combustion efficiency as well as the heat produced. Therefore, wood added to the fire burns better. The frame around the fire reflects the heat which ignites the wood stumps which would otherwise produce smoke.

Wood fuel use is reduced by 75% and there is much less risk for eye burning smoke.

The fire box is indispensible if you are going to build a fire on snow. The legs fold out and can be placed on branches or other support material on the snow, thereby preventing the fire box from sinking into the snow.